Welder | WPTI-X
Welders read plans, prepare and cut metal parts, join them with welding equipment, and inspect the work for defects. Explore conditions such as protective gear, ventilation, and positions.
Type code: PRES
Typical work
- Read plans and instructions to confirm part dimensions and joint locations.
- Prepare metal surfaces and select equipment and consumables for the metal type and thickness.
- Join metal parts in flat, vertical, or overhead positions.
- Monitor heat and joint quality during work and inspect finished pieces for dimensions and defects.
- Report faulty equipment or defective materials and maintain equipment and the work area.
- Set up and adjust equipment and check connections and consumables before work.
Useful skills
- Focus on measurements and detail
- Equipment use and procedural discipline
- Precise hand-eye coordination
- Safe work habits with protective equipment
- Sustained focus amid heat and noise
Education and training research
- Read the BLS and O*NET welding work description and research local practical routes covering metal preparation, joining, and equipment safety.
- Check employer postings and training information for the on-site instruction needed for process-specific quality checks.
- Equipment and practice can differ between processes such as arc and gas welding, so compare the process lists in program descriptions.
- As the O*NET task list shows, welding can be done in flat, vertical, or overhead positions and goes together with reading plans and matching dimensions.
- Just as the BLS material groups cutting, soldering, and brazing with welding, program information shows which of these tasks a course covers.
- When practicing visual and measured inspection of welds, a table of defect types and causes makes it easier to compare what you learn.
Work environment questions
- As the BLS describes, welding can take place amid heat, sparks, fumes, and noise, so protective equipment and ventilation are part of daily work.
- Ask practitioners how plans, instructions, and quality records are shared by the crew.
- Factory work and field work, such as construction or shipbuilding sites, can differ in location and schedule.
- Reporting faulty equipment or defective material to supervisors is also part of the O*NET task list.
- Safety procedures can change with the location, such as indoor plants, outdoor structures, or confined spaces; on a visit, notice the work-zone markings and protective-equipment rules.
- Repeatedly producing the same part and building a different structure each time can have different rhythms; consider where you focus best.
Entry checks
- Review local employer postings and official workplace-safety information.
- Verify any process- or site-specific training and assessments with local agencies and employers.
- If you are exploring in Korea, search CareerNet or Work24 occupation information for welding titles and compare the scope of work.
- Try a taster class or workshop session that requires focused work in protective equipment, and record how it felt and what was difficult.
- Check whether sites use automated equipment or welding robots and how operators learn them.
- Compare with the carpenter and electrician pages and summarize differences in materials, tools, and quality checks.
Related occupations
What the data supports
This profile supports only the occupation information and exploration prompts shown here from the official sources.
Limitations
This profile summarizes official BLS and O*NET occupation information for exploration. Education, training, work, and entry requirements can vary locally; verify them with local official agencies and employers. A WPTI-X type does not guarantee fit or hiring outcomes.
Official sources
Reviewed: 2026-09-15